1. Edgerouter Lite Setup
2. Ubiquiti Edge Router Lite Firmware

Ubnterlbridgeconfig.tar.gz This is a basic router configuration with one WAN and two LAN ports with DHCP connection type for WAN and DHCP server for the LAN. Specifically:. Configures port 0 as WAN, expecting a simple DHCP connection. Configures the ERL's admin address as 192.168.1.1. Bridges ports 1 and 2, essentially forming a two-port switch for LAN connection.

Edgerouter Lite Setup

Ubiquiti Edge Router Lite Firmware

Configures a DHCP LAN server, serving addresses from 192.168.1.100 to 192.168.1.200. Configures a simple NAT router to shart the internet with all LAN clients. Configures a firewall rules blocking all inbound WAN-to-LAN traffic to LAN clients and to router itselfubnterl2lanwdhcp.tar.gz This configuration supports two subnets on the LAN side, with different IP ranges for each.